|
http://www.charger-battery.ca/battery_PANASONIC_DMC-FS10_40034.htm
PANASONIC camera battery Replace part number blow:
Panasonic
DMW-BCF10 DMW-BCF10E
Replacement Panasonic DMC-FS10 camera battery Model Fits:
* Panasonic
Lumix DMC-F2 Lumix DMC-F3 Lumix DMC-F3K
Lumix DMC- F3P Lumix DMC-F3S Lumix DMC-FH20
Lumix DMC-FH22 Lumix DMC-FH3 Lumix DMC-FP8
Lumix DMC-FP8A Lumix DMC-FP8G Lumix DMC-FP8K
Lumix DMC-FP8N Lumix DMC -FP8P Lumix DMC-FP8R
Lumix DMC-FP8S Lumix DMC-FP8V Lumix DMC-FS11
camera battery Tips:
* New PANASONIC DMC-FS10 camera battery are shipped in a discharged condition and must be charged before use. We generally recommend an overnight charge (approximately twelve hours). Refer to the user's manual for charging instructions. Rechargeable PANASONIC DMC-FS10 camera battery should be cycled - fully charged and then fully discharged - two to four times initially to allow them to reach their full capacity.
* Try to avoid frequent full discharging of the PANASONIC DMC-FS10 camera battery.
* It is normal to get warm when charging or normal use the cheap PANASONIC DMC-FS10 camera battery. If it is getting too hot, there may be a problem with the device and qualified personnel should check it.
* If you don't plan on using the replacement Panasonic DMC-FS10 camera battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects.
* To get maximum performance from the PANASONIC DMC-FS10 camera battery, fully optimize the notebooks power management features prior to use. Power management is a trade off: better power conservation in exchange for lesser computer performance. The power management system conserves battery power by setting the processor to run at a slower speed, dimming the screen, spinning down the hard drive when it's not in use and causing the machine to go into sleep mode when inactive. The notebook users guide will provide information relating to specific power management features.
|
